London Brow Lamination Pro Instructions

London Brow Lamination Pro Range - Step-by-Step Instructions

1. Cleansing

  • Start by removing makeup from the eyebrows using an oil-free pre-wax cleanser or brow cleanser.

2. Preparation

  • Brush the eyebrows with a disposable mascara brush.
  • If using Brow Adhesive: Apply a thin coat of brow Glue. Straighten the hairs and set them in the desired direction and shape.
  • If not using Brow Adhesive: Apply a thin barrier lotion or Vaseline to the top and under the brow.

3. Brow Perm Application (Lifting Creme 1)

  • Apply a thin coat evenly with a microfiber brush, ensuring full hair coverage.
  • Avoid skin contact and remove excess product from the skin with a damp cotton bud or pad.
  • If desired, cover with clean cling film.

Timing:

  • Thin/Fine Brows: 2-3 minutes
  • Medium/Normal Hair: 3-4 minutes
  • Coarse Stubborn Hairs: 4-6 minutes
  • Check brows halfway through for processing.

4. Removal of Brow Lift 1

  • After processing, gently remove with a damp cotton pad, following hair growth.
  • Ensure all perm is removed before proceeding to step 2.
  • Set hairs at a soft angle towards the tail.

5. Applying Neutralising Creme (Step 2)

  • Apply generously over the brow hairs.
  • Remove excess product from the skin.
  • Leave on for 8 minutes.
  • Halfway through, gently set hairs in place.

6. Removal of Brow Lift 2

  • After processing, carefully remove with a damp cotton pad.
  • Ensure all neutraliser is removed before tinting or shaping.

7. Eyebrow Tinting

  • Dye the eyebrows as per training.
  • Consider client preference for a natural or bold look.
  • Remove excess dye promptly to control tinting.

8. Waxing

  • Wax brows as per training, after lamination and tinting.

9. Nourishing Serum Application (Step 3)

  • Apply liberally to the entire eyebrow area.
  • Set brows in final position.
  • Leave on to absorb without washing off.

10. Client Aftercare

  • Show the client the final look and explain aftercare instructions.

 

London Brow Lamination Features

  • Synthetic Free, Paraben-free, Ammonia-free.
  • 100% Vegan and Cruelty-free.

  • Skin Sensitivity Test
  • Perform a patch test 72 hours before treatment.
  • Apply mixed tint on the client’s inner arm for at least 5 minutes.
  • Record the test on the client record card.
  • No guarantee of no allergic reaction during treatment despite a negative test result.

Read our full patch testing guidelines here

Caution

  • Professional use only.
  • Patch test mandatory.
  • Not for those under 16 years or with specific contraindications (e.g., skin irritations, reactions to perming products, refer to your professional training).

Aftercare

  • Avoid aggressive cosmetic treatments, and hot environments for 24 hours.
  • Avoid lotions, toners, and creams in the treated area.
  • Always brush brows up and into place after getting wet.

 

Storage Conditions

  • Store between +5°C to +25°C, away from heat and direct sunlight.

Manufacturer / RP

  • London Brow Company Limited, 85 Great Portland Street, London, W1W 7LT, UK
  • Contact: +44 8003345373
  • www.londonbrowcompany.com

Remember to always follow your training and adjust timings and techniques as needed for each client's specific brow type. Enjoy creating beautiful brows!