London Speed-lift Lash Lifting Instructions

London Speed-lift Lash Lifting 

Step-by-Step Instructions


Step 1: Preparation

Step 2: Applying Speed-lift Adhesive

  • Apply a strip of speed-lift adhesive to the front of the silicone pad.
  • Use the speed-lift lash tool to gently secure the eyelashes onto the pad, ensuring precise placement.

Step 3: Applying Speed-lift Perm Gel (Step 1)

  • Use a Micro Brush or speed-lift angled brush to apply Step 1 on lashes, leaving a 1-2 mm gap at the root.
  • Apply up to 3/4 of the lashes, avoiding the tips, and distribute the perm in a thick layer evenly from the outer to the inner corner of the eye.

Step 4: Speed-lift Timings

  • Refer to the following timings based on the client's natural lash type:
    • Thick Coarse Lashes: 10 - 12 minutes
    • Average Healthy Lashes: 8 - 10 minutes
    • Fine or Thin Lashes: 5 - 6 minutes
  • Start the timer once the perm application is complete for the first eye.

Step 5: Removing Perm

  • After the appropriate timing, use a damp cotton bud to gently remove the step 1 perm.
  • Work slowly to ensure thorough removal and re-adhere any loose lashes with lash adhesive.

Step 6: Applying Speed-lift Step 2 Neutralising Lotion

  • Apply Step 2 setting lotion to the lashes using a clean brush, ensuring full coverage.
  • Leave the neutralising lotion on for 5 minutes.

Step 7: Neutralising

  • Remove the Step 2 neutraliser with a damp cotton bud, following the same process as perm removal.

Step 8: Tinting (Optional)

  • Tint the client's lashes while they're still on the eyelash pads or after removing them.
  • Limit tinting time to 5-6 minutes to avoid over-processing.

Step 9: Removing Tint

  • Use warm damp cotton pads to gently remove the tint, moving in an upward motion.

Step 10: Speed-lift Step 3 Nourishing Serum

  • Apply Step 3 nourishing serum to the lashes, gently lifting them away from the pad.

Step 11: Drying and Finishing

  • Allow the lashes to air dry for 1-2 minutes.
  • Brush the lashes with a small amount of Step 3 using a micro brush to separate them.
  • Provide clients with aftercare instructions and recommend appropriate post-treatment products for best results.


    London Speed-lift Features

    • Waterproof so clients can get lashes wet within 24 hours of treatment.
    • 100% Vegan and Cruelty-free.
    • Synthetic Free, Paraben-free, Ammonia-free.

    • Skin Sensitivity Test
    • Perform a patch test 72 hours before treatment.
    • Apply on the client’s inner arm for at least 5 minutes.
    • Record the test on the client record card.
    • No guarantee of no allergic reaction during treatment despite a negative test result.

    Read our full patch testing guidelines here


    • Professional use only.
    • Patch test mandatory before treatment.
    • Not for those under 16 years or with specific contraindications (e.g., skin irritations, reactions to perming products, refer to your professional training).


    • Avoid aggressive cosmetic treatments, and hot environments for 24 hours.
    • Avoid lotions, toners, and creams in the treated area.
    • Always brush brows and lashes up and into place after getting wet.


    Storage Conditions

    • Store between +5°C to +25°C, away from heat and direct sunlight.

    Manufacturer / RP

    • London Brow Company Limited, 85 Great Portland Street, London, W1W 7LT, UK
    • Contact: +44 8003345373

    Remember to always follow your training and adjust timings and techniques as needed for each client's specific brow or lash type. Enjoy creating beautiful lashes!